Skid Steer Loader — Truck-Dumped Fill

Skid-Steer Graders

Skid-steer grading attachments operate with a manoeuvrable carrier, which can suit constrained sites. Compare their grading role and material movement with the space and load requirements of a tractor scraper.

Before moving material

Assess access, turning room and ground support.

Receiving operation and checks

Verify the grade and prepare the next layer. Inspect how repeated carrier turns affect the receiving surface.

Manoeuvrability does not establish suitability for every material or haul distance.

Machine Before - Dugong - Machine After

The machine before Dugong determines what material arrives; the machine after Dugong determines what surface must leave. An excavator can expose formation, a loader can deliver a stockpile, and a roller can compact the placed layer. The scraper's role is bounded by those interfaces.

Before moving material

Identify the upstream operation and its remaining defects.

Receiving operation and checks

Hand over the measured surface to compaction, cultivation, paving or turf preparation. Record which operation owns levels, materials and final acceptance.

The workflow can include Dugong where suitable; it does not assume Dugong replaces adjacent equipment.

Loader to Grading Workflow

A loader handles stockpiles and delivers material; the next grading operation distributes that material into the required surface. Avoid treating irregular loader deposits as a finished layer.

Before moving material

Confirm material class and the receiving layer's requirements.

Receiving operation and checks

Compact or prepare the layer for its next use. Check the depth and consistency between deposited loads.

Scraper loading and loader bucket handling are different capabilities.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology