Compactor — Moving Soil 100 Metres

GNSS Machine Control

GNSS machine control combines positioning, machine geometry and design information. An accurate receiver position is not automatically an accurate cutting-edge position.

Before moving material

Confirm corrections, sensor arrangement and the coordinate reference.

Receiving operation and checks

Check the completed surface with an independent method. Inspect offsets, design revision and correction status when results disagree.

Compatibility must be confirmed for the actual machine and control installation.

Machine-Control Systems

Machine-control systems can display guidance or command hydraulic movement; those are different functions. An installation should identify sensors, design input, actuator control and the operator's remaining responsibilities.

Before moving material

Document the proposed complete control chain.

Receiving operation and checks

Commission the installation before relying on production output. Test known reference points and observe response under a controlled method.

Do not assume brand-name receivers or tractor systems are mutually compatible.

Transport Lockouts and Machine State

Transport lockouts and parked-machine arrangements should follow the supplied machine instructions. A hydraulic control position should not be treated as an unspecified mechanical transport restraint.

Before moving material

Identify the actual locking and isolation arrangements.

Receiving operation and checks

Use the transport company's agreed loading and restraint process. Check that the machine is in its specified transport state.

This guide does not design a restraint system or replace the machine manual.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology